Basler BIP2-DXXXXc-dn Przewodnik Instalacji Pobierz pdf (Strona 21)

AW00101404000 Installation Guide

Basler IP Fixed Dome Cameras 19

EnglishLanguageLanguageLanguageLanguageLanguageLanguageLanguage

7. Route the Y-cable across the camera base as shown in the drawing below.

8. Plug a monaural microphone (or similar audio input device) with a 3.5 mm

plug into the jack on the end of the cable labeled "Input".

9. The 3.5 mm monaural jack on the end of the cable labeled "Output" can be

connected to an active speaker or, for example, to the line-in connector on

a PC. Note that the output from this jack is not amplified and cannot drive

headphones or a passive speaker.

Note: Software switchable 2.2 V power is available on the input line; this is

normally used with a microphone that requires power. Software switchable 20

dB gain is also available on the input line. See the camera user’s manual for

more details.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 88 89

Komentarze do niniejszej Instrukcji

Brak uwag