Basler BIP2-DXXXXc-dn Przewodnik Instalacji Pobierz pdf (Strona 38)

Installation Guide AW00101404000

36 Basler IP Fixed Dome Cameras

The functionality of each wire fixing hole in the main terminal block is as

described in Table 1.

Hole Name: Gnd (outdoor dome cameras only)

Function: Ground for alternate camera power.

Note: The ground for alternate camera power, the I/O ground, and the RS-485

ground are all isolated from each other.

Hole Name: VDC (outdoor dome cameras only)

Function: Use this fixing hole to supply alternate power to the camera (i.e., use this

connection to supply power to the camera if you are not using PoE).

Nominal operating range: +12 to +24 VDC

Max power consumption: 10 W @ 12 VDC when the heater is enabled

5.5 W @ 12 VDC when heater is disabled

Hole Name: Heater Off (outdoor dome cameras only)

Function: Place a jumper between the Heater Off fixing hole and the Gnd fixing hole

to disable the camera’s heater.

If you are using alternate power, the camera’s power consumption will be 10 W when

the heater is enabled and 5.5 W (@ 12 VDC) when the heater is disabled.

If you are using PoE, the camera will be Class 0 when the heater is enabled and will

be Class 2 when the heater is disabled. This can be useful when you are using the

camera with a PoE switch that is only capable of supplying low amounts of power.

Hole Name: I/O Gnd

Function: Ground for the camera’s I/O ports

Note: The ground for alternate camera power, the I/O ground, and the RS-485

ground are all isolated from each other.

Table 1: Main Terminal Block Wire Fixing Hole Assignments

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 88 89

Komentarze do niniejszej Instrukcji

Brak uwag