Basler BIP2-DXXXXc-dn Instrukcja Użytkownika Pobierz pdf (Strona 18)

Configuring the Camera AW00101507000

14 Basler IP Fixed Dome Cameras

3.3 Image Control Parameters

The parameters in the Image Controls group control the quality of the images captured by the

camera's imaging sensor.

3.3.1 Exposure Tab

 Prioritize Quality = Automatic exposure time control and automatic gain control are both

enabled. The camera’s automatic exposure and gain adjustments will be biased so that image

quality is maintained at as high a level as possible. Maintaining the frame rate is given a lower

priority.

If desired, the Exposure Time Limit and the Gain Limit parameters (see below) can be used to

put limits on the auto controls.

 Manual Gain = Automatic gain control is disabled, and you must manually set the gain by using

the Gain parameter (see below).

Automatic exposure time control remains enabled. If desired, the Exposure Time Limit

parameter (see below) can be used to put a limit on the auto exposure control.

 Manual Exposure Time = Automatic exposure time control is disabled, and you must manually

set the exposure time by using the Exposure Time parameter (see below).

Automatic gain control remains enabled. If desired, the Gain Limit parameter (see below) can

be used to put a limit on the auto gain control.

 Manual Gain and Exposure Time = Automatic gain control and automatic exposure time control

are both disabled. You must manually set the gain and the exposure time by using the Gain

and Exposure Time parameters (see below).

Note that the operation of the automatic gain and exposure time controls will be strongly influenced

by the placement of the auto brightness mask. For more information about the auto brightness

mask, see page 26.

Exposure Mode - Sets the camera’s exposure mode.

 Prioritize None = Automatic exposure time control and automatic

gain control are both enabled. The camera will automatically

adjust both the exposure time and the gain to maintain good

overall image quality as lighting conditions change. Neither the

exposure time adjustment nor the gain adjustment will have

priority.

If desired, the Exposure Time Limit and the Gain Limit parameters

(see below) can be used to put limits on the auto controls.

 Prioritize Framerate = Automatic exposure time control and

automatic gain control are both enabled. The camera’s automatic

exposure and gain adjustments will be biased so that the frame

rate is maintained at as high a level as possible. Maintaining

image quality is given a lower priority.

If desired, the Exposure Time Limit and the Gain Limit parameters

(see below) can be used to put limits on the auto controls.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 127 128

Komentarze do niniejszej Instrukcji

Brak uwag