Basler BIP2-DXXXXc-dn Instrukcja Użytkownika Pobierz pdf (Strona 89)

AW00101507000 Terminal Blocks and Audio Connector

Basler IP Fixed Dome Cameras 85

5 Terminal Blocks and Audio

Connector

5.1 The Main Terminal Block

The terminal block on the front of the camera base can be used to:

 provide alternate power to the camera when PoE is not used

(this functionality is available on outdoor dome cameras only)

 access the camera’s I/O ports

 power a small DC device such as a relay

 limit the camera’s power consumption by disabling the camera’s heater

NOTICE

Do not apply AC voltages or voltages outside of the specifications to the main terminal block.

1. Apply only DC voltages. Applying AC voltages can severely damage the camera.

2. Make sure that the voltages are within the limits specified in Table 3 on page 87. Applying

voltages outside of the specifications can severely damage the camera.

NOTICE

Always switch off camera power before making or breaking connections at the main terminal

block.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 127 128

Komentarze do niniejszej Instrukcji

Brak uwag